MT2USBMS is a small size low power stand-alone control device which can control both two bipolar and two unipolar stepper motors (i.e. 8 and 4 lead motors, and 6 lead center tapped motors) and their respective limit/home detection sensors (one for each axis, with programmable polarity).

This device was designed to manage high precision single plane x-y positioning systems.

Although MT2USBMS was conceived mainly to control finite rotation movements, it can also work with direct cycle motors and, for exemplum, it can also be used as speed control device.

for information: info @ ipses.com

Download MT2USBMS manual

Download DLL use manual

Stepper motor control cards.pdf

Technical Specifications

MT2USBMS is managed by a USB interface with a dedicated protocol. It is possible to set out the motor rotation speed (from 18 up to 500 half-step/second or from 1,8 up to 50 half-step/second, depending on the selected model of MT2USBMS). The rotation speed is not linearly reached: acceleration and deceleration follow a profile optimizing the motor supplied couple.

The card has small dimensions and can be connected directly to stepper motors with nominal current up to 0,75A.

One input for limit/home detection per axis is provided

Power supply: the logic is self supplied directly from the USB port of the computer.

Motor power supply: from 4,5 up to 30Vdc.

Output current: max 0,75A/phase (0,85A of peak).

Interface: USB 2.0 (type B connector).

Size: 80 x 60 x 15 mm (about 2,36 x 3,15 x 0,59 inch).