|
The
most complete range of cards for the intelligent
control of stepper motors
Our
motion cards are the perfect solution to manage
stepper one axis or multi-axes motors with
nominal current up to 0.75A. The position
commands are directly sent to the motor by
the personal computer through USB, serial
or ethernet interface, so to answer to the
best all customers' necessities.
MT2
cards are small size low power control devices
which can control both two bipolar and two
unipolar stepper motors (i.e. 8 and 4 lead
motors, and 6 lead center tapped motors) and
their respective limit/home detection sensors
(with programmable polarity).
Although
MT2 cards were conceived mainly to control
finite rotation movements, they can also work
with direct cycle motors and, for exemplum,
they can also be used as speed control device.
for
information:
info @ ipses.com
Stepper
motor control cards.pdf
Electric Motors Reference Center
(external link)
|
|
Available
version
MT2USB:
control card for two stepper motors with USB
interface.
MT2USBMicrostepper:
high resoulution control card for two stepper
motors with USB interface.
MT2ETH: control card for
two stepper motors with ethernet interface.
MT2ETHMicrostepper:
high resoulution control card for two stepper
motors with ethernet interface.
MT2:
control card for two stepper motors with serial
interface (RS232).
MT2Microstepper:
high resoulution control card for two stepper
motors with serial interface (RS232).
|
|
