MT Sytems
The most complete range of cards for the intelligent control of stepper motors.
The most complete range of cards for the intelligent control of stepper motors.
Our motion cards are the perfect solution to manage stepper one axis or multi-axes motors with nominal current up to 3A.
The position commands are directly sent to the motor by personal computer through USB, serial or Ethernet interface, so to answer to the best all customers' needs.
MT-series cards are small size low power control devices which allow to control both bipolar and unipolar stepper motors (i.e. 8 and 4 lead motors, and 6 lead center tapped motors) and their respective limit/home detection sensors (with programmable polarity).
Although MT-series cards were conceived mainly to control finite rotation movements, they can also work with direct cycle motors and, for istance, they can also be used as speed control device.
Additional Documents
IPSES - MT2MT3 Brochure IT [387.1 kB]
MT2HC
Two-axis stepper motor control system at 3A with current control and USB interface.
MT2USB
Units and cards for stepper motor control with nominal current up to 0.75A, equipped with an USB interface.
MT2ETH
Units and cards for stepper motor control with nominal current up to 0.75A equipped with Ethernet interface.
MT2
Units and cards for stepper motor control with nominal current up to 0.75A equipped with RS232 serial interface.
MT3
Control unit for three stepper motors with nominal current up to 0.75A equipped with USB interface
MT - Accessories
Cables, connectors, software, driver and library for MT2 and MT3 systems.
