IPSES News - english version

Published our paper "Developing a Photon Counting System for Thermoluminescence Dating Analysis"

Mon, 13 May 2013 15:46:36 +0200

Also National Instruments "Technology Forum on graphical system design - solutions and applications 2013", published IPSES paper "Developing a Photon Counting System for Thermoluminescence Dating Analysis Using NI LabWindows/CVI Software".
The paper described IPSES devices for Thermoluminesce dating analysis, already used in several laboratories in Italy and all over the World.
For reading the paper in English: http://www.ipses.com/PDF/Photon%20Counting%20system.pdf.
For further information on IPSES Thermoluminescence laboratory, see our website

Published on 6TL website IPSES case study on developed test system for automotive RF testing

Wed, 24 Apr 2013 09:41:22 +0200

On 6TL website is available IPSES case study about the test platform developed for automotive RF testing.
IPSES realized a test system able to respond effectively to the needs of reliability, modularity , standardization and content development time required by the customer. The bench was installed in the first production line of FAB Vehicle Security Solutions on RF and control automotive systems. The experience of IPSES in conceiving test system together with the partnership with 6TL allowed to deliver a fully customized solution, with reduction of cost and time for the investment: the realized bench is completely modular and allows an easy upgradability and maintainability during time.
the full case study is available here: https://www.6tlengineering.com/af_veureapplication.asp?id=25
For further information about testing solution, please visit our website

IPSES on PCB Magazine: Special on functional testing. Go up to the highest performance

Thu, 11 Apr 2013 16:29:57 +0200

The PCB Magazine n. 2 of March 2013 published an article about IPSES and its solutions for functional testing, describing applications and potential of the test platforms of the Spanish 6TL, of which IPSES is the exclusive representative in Italy and Switzerland, both for sale and for the technical support. IPSES configures and integrates 6tl platform, also dealing with the design and development of customized fixtures and test sequences, thus providing easy to manage, powerful in performance complete test systems, able to fully respond to all the requirements of the customer.
Form our website is possible to download the full paper in pdf format (available only in Italian)

IPSES obtained once again the competency as Microsoft Silver Learning

Tue, 2 Apr 2013 11:56:36 +0200

IPSES obtained once again the competency as Microsoft Silver Learning
This competence will be added to the previous ones already gained as:
Microsoft Project and Portfolio Management Specialist
Small Business Specialist
Silver Midmarket Solution Provider
Silver OEM
Silver Volume Licensing
Contact us to know all the advantages that a certified Microsoft partner can give to your company for training and for providing products and services. For further information, please contact us or consult our space in Microsoft website at the following link:
http://pinpoint.microsoft.com/it-IT/PartnerDetails.aspx?PartnerId=4296470445

On line the new paper by IPSES: System for the monitoring and characterization of devices for time generation and frequency based on LabVIEW and sbRIO

Mon, 25 Mar 2013 16:43:34 +0200

The new paper entitled "System for the monitoring and characterization of devices for time generation and frequency based on LabVIEW and sbRIO" has been published on the Last review of Technology Forum on graphical system design - solutions and applications 2013 by National Instruments.
The paper describes the embedded stand-alone system conceived by IPSES for the monitoring and characterization of reference systems of time and frequency with an accuracy of less than 10 ns, able to operate autonomously for at least three months, keeping track of all the measurements carried out and allowing the complete monitoring and remote control.
The whole paper can be read in Italian on NI web site here: http://sine.ni.com/cs/app/doc/p/id/cs-15358

IPSES at NIDAY 2013

Mon, 11 Mar 2013 11:27:29 +0200

Also this year the participation of IPSES at the NIDAY was a valuable chance to meet and exchange ideas to present its products and services. IPSES thanks all those who have come on its stand last February 27th and asked everyone to contact its research and development offices to further study with its highly qualified team the best solutions to their needs in the field of industrial automation, testing, systems integration and development with National Instruments tools.

IPSES At NIDays 2013

Wed, 20 Feb 2013 14:29:52 +0200

Also this year, IPSES will participate at the NI-Day 2013, Technology Forum on graphical system design, the annual global conference organized by National Instruments, to be held in Milan at MiCo (Milan Congress Center) Wednesday, February 27, 2013. Come to visit us at booth n. 23.
IPSES will present its National Instruments software and hardware development services, its Partnership with 6TL, of which IPSES is the official representative for Italy and Switzerland, with its systems and accessories for testing

To see the complete program of the event and to participate, free registration at: http://italy.ni.com/nidays

For further information on IPSES products and services: http://www.ipses.com/services/testdevice.php?language=en http://www.ipses.com/services/systemintegration.php?language=en

IPSES at the next NIDAY2013

Thu, 17 Jan 2013 12:18:19 +0200

IPSES will exhibit at the next NI-DAY 2013, the National Instruments Technology Forum on design of graphical systems, solutions and applications. IPSES will presents its software and hardware development services. Come to visit our stand at MiCo- Milan congress center on the next 27th of February. Click here for a free application to the event: http://italy.ni.com/nidays?espuid=CNATL000008058464
In the review of the event, IPSES will also publish its project, developed for Eurolab, of a timing and frequency generator
For further information on IPSES solution with National Instruments hardware and software, visit also our web-page http://www.ipses.com/services/systemintegration.php?language=en and our page on National Instruments website: http://partners.ni.com/partner_locator/partner_details.aspx?id=86422&backUrl=%2fpartner_locator%2fsearch.aspx%3fl%3dItaly

Season's Greetings from IPSES

Wed, 19 Dec 2012 11:28:33 +0200

The entire staff of IPSES wishes you happy holidays.
Our offices will be closed only on 24th and 31st December and will be regularly open other days.

IPSES page on line on National Instruments website

Fri, 7 Dec 2012 10:28:44 +0200

The page describing the skills and services of IPSES is on line on National Instruments website at the following link:
http://partners.ni.com/partner_locator/partner_details.aspx?id=86422

IPSES is a NI alliance partner company, with a wide experience in system integration. u With its excellent knowledge of all National Instruments platforms and its wide experience in using and integrating NI hardware (CompactRIO, sbRIO, PXI, CAN, DAQ, etc.) and software (LabWindows/CVI, LabView e TestStand), IPSES offers its clients customized solutions and services, providing both technological and economic benefits.
Besides IPSES technicians are certified as NI LabVIEW, LabWIndows/CVI e TestStand developers.

IPSES gained the new competency as Microsoft Project and Portfolio Management Specialist

Wed, 7 Nov 2012 11:41:38 +0200

IPSES is proud to announce to have a new Microsoft competence as Microsoft Project and Portfolio Management Specialist.
This competence will be added to the previous ones already gained as:
Small Business Specialist
Silver Midmarket Solution Provider
Silver OEM
Silver Volume Licensing
Contact us to know all the advantages that a certified Microsoft partner can give to your company for training and fro providing products and services. For further information, please contact us or consult our space in Microsoft website at the following link:
http://pinpoint.microsoft.com/it-IT/PartnerDetails.aspx?PartnerId=4296470445

Published by XJTAG the case study on the application based on boundary scan fast-tracks solution for testing complex, high-density boards developed by IPSES

Tue, 23 Oct 2012 12:35:56 +0200

XJTAG publishes the case study about the application developed by IPSES for Linkra, selecting XJTAG boundary scan to test complex boards containing over 20.000 solder joints with around 5.500 connection nets. XJTAG boundary scan is able to test a high proportion of connections and components, including non-JTAG devices, with very few physical connections to the board: IPSES delivered a priced solution within a fast turnaround time using the XJTAG boundary scan system. Complete case study can be read or downloaded at the following link http://www.ipses.com/PDF/IPSES_XJTAG_CaseStudy.pdf

Available on National Instruments website, the newsletter describing our application for TL analysis

Mon, 8 Oct 2012 11:17:25 +0200

It is now available on the National Instruments website, the newsletter describing our application for thermoluminescence analysis applied to the dating of archaeological finds.
Further information on instrumentations can also be read on our website at the following link:
http://www.ipses.com/prod/TL/TL_Lab.php?language=en

IPSES IS official distributor in Italy of Scantool.net

Thu, 13 Sep 2012 09:58:11 +0200

We are pleased to announce IPSES is become official distributor for scantool.net (http://www.scantool.net/scantool/distributors/it/) in Italy. Scantool.net is specialized in device for OBD diagnostic in automotive applications.
Besides, IPSES will offer its clients technical advise and support in the selection of the best solution for their needs.

Reopening offices

Mon, 3 Sep 2012 17:15:34 +0200

IPSES S.r.l announces that from 27/08 all offices are open and operational after the summer break. Also this year, however, technical support was always available to its customers during the entire month of August.

Closing for summer holydays

Tue, 14 Aug 2012 10:23:55 +0200

Our offices will be closed for summer holidays from the 20th August 2012 till the 28th of August 2012.
For any request you can contact us at info@ipses.com and we shall answer as soon as possible.

IPSES obtained once again the Microchip Master Certification

Wed, 8 Aug 2012 11:10:33 +0200

The Technical Committee of Microchip Technology Inc. renewed to IPSES the MASTER CERTIFICATION, already obtained in 2009 and 2010, for the year 2011-2012.

A recognition that rewards our work in electronic design and firmware development for all the families of Microchip microcontrollers.

The New version of D2XX driver for the USB systems produced by IPSES has been released

Thu, 5 Jul 2012 17:45:29 +0200

A few days ago the new version of D2XX driver for the USB systems produced by IPSES has been released
This version (2:08:24) is WHQL certified and is included in the circuit of "Windows Update Driver Distribution" (meaning that the driver is automatically detected and installed on computers connected to the Internet.)

The systems and cards that use the new drivers are:
"MT2USB Control Unit (http://www.ipses.com/prod/MT2/mt2usb.php?language=en).
"MT2HC Control Unit (http://www.ipses.com/prod/MT2/mt2hc-box.php?language=en).
"MT3 Control Unit (http://www.ipses.com/prod/MT3/MT3.php?language=en).
"IO-69 Control Unit (http://www.ipses.com/prod/IO69/io69.php?language=en ).
"IN8 Control Unit (http://www.ipses.com/prod/IO69/in8.php?language=en ).
"9-O Control Unit (http://www.ipses.com/prod/IO69/index.php?language=en ).
"CAN-IO (http://www.ipses.com/prod/IO69/CAN-IO.php?language=en ).
"CAN-Logger (http://www.ipses.com/prod/Logger/CANlogger.php?language=en ).
"CAN-Sniffer (http://www.ipses.com/prod/Logger/CANSniffer.php?language=en ).
"Libra (http://www.ipses.com/prod/LiBRA/index.php?language=en ).

Operating systems supported by the driver are as follows:
Microsoft Windows 2000 family
Microsoft Windows XP family, x86
Microsoft Windows Server 2003 family, x86
Microsoft Windows Server 2003 family, x64
Microsoft Windows XP family, x64
Microsoft Windows Vista family, x86
Microsoft Windows Vista family, x64
Windows Server 2008 family, x86
Windows Server 2008 family, x64
Windows 7
Windows 7 x64

IPSES once again demonstrated its expertise in recertification WHQL and continues to provide this service to companies that use FTDI chip and want to have a certified and inserted into the "Windows Update Driver Distribution" circuit driver for their product.

Research exchange program among IPSES, The Archaeological department of the National Museum of Myanmar and the Physics Department of the University of Turin

Fri, 15 Jun 2012 15:36:57 +0200

We are proud to announce the starting of the research exchange program among IPSES, The Archaeological department of the National Museum of Myanmar and the Physics Department of the University of Turin. Two researchers from Myanmar arrived in Italy on June 14th and will be guest at the Physics Department for a training on Thermoluminescence analysis. This exchange is part of the scientific project that includes the setup of the Thermoluminescence laboratory made by IPSES last year in National Museum of Myanmar at Yangon.
The scientific partnership between IPSES and the Physics Department of the University of Turin, TecnArt group, is leading a remarkable results in research cooperation programs.
We wish our guests a pleasant stay in our Country

IPSES is representative of Italy and Switzerland for sales and technical support of 6TL test benches

Thu, 31 May 2012 11:24:41 +0200

The partnership between the Spanish 6TL and IPSES confirms and solidifies. By partnering with 6TL, testing division of the Spanish group Sistel, IPSES provides standard and modular solutions for the functional testing, in-circuit and JTAG.
The expertise and experience in the development of test sequences and hardware integration with hardware of National Instruments of which IPSES is Alliance Partner, in addition to the recent collaboration with xJTAG as a technology partner, makes IPSES the ideal partner for the development of complete test solutions, integration into systems already developed, migration and upgrade of technology.

IPSES is XJTAG technology partner

Wed, 23 May 2012 11:16:52 +0200

We are pleased to announce IPSES is XJTAG technology partner. An achievement that confirms the competence of IPSES in the development and integration of test systems and its high level of expertise in making software platform through XJTAG environment.

Published our paper on Developing a Photon Counting System for Thermoluminescence Dating Analysis Using NI LabWindows/CVI Software

Fri, 11 May 2012 10:42:37 +0200

Our paper "Developing a Photon Counting System for Thermoluminescence Dating Analysis Using NI LabWindows/CVI Software " has been published on National Instruments website: case studies 2012.
The paper describes the integrated hardware and software system that can date archaeological or historical materials by analyzing emitted luminescence from heated samples.
The paper can be read on line at the following site http://sine.ni.com/cs/app/doc/p/id/cs-14511

Published our paper about Unified system for characterization of bitumens and asphalts

Thu, 26 Apr 2012 12:05:51 +0200

Our paper "Unified system for characterization of bitumens and asphalts based on NI Compact RIO and NI LabVIEW " has been published on National Instruments Forum on Technology Graphic Design Systems - solutions and applications2012.
The paper describes the integrated hardware and software system for the physical and mechanical characterization of bitumen and asphalts by tests of resistance and durability developed by IPSES for Controls, the major word producer and supplier of testing equipment for the Construction Industry.
The paper can be read (in italian) on line at the following site http://sine.ni.com/cs/app/doc/p/id/cs-14557

IPSES is Microsoft Learning Partner

Tue, 17 Apr 2012 10:51:19 +0200

IPSES is pleased to announce the achievement of Microsoft Learning Partner competence.
IPSES offers its customers a new service dedicated to learning the professional training of all Microsoft Office applications. The courses, taught by Microsoft certified trainers and Microsoft Office Specialists, can be customized to match the goal to be achieved and the level of preparedness of the participants.
The training, organized in modules, provides courses of different levels (core, advanced and expert) to:
Word
Excel
PowerPoint
Access
For further information, please visit the relevant page in our website

IPSES is National Instruments Alliance Partner

Fri, 30 Mar 2012 15:32:49 +0200

We are pleased to announce IPSES is National Instruments Alliance Partner. An achievement that confirms the competence of IPSES in the development and integration of systems with National Instruments hardware and software tools. The development team of IPSES is already certified as NI LabVIEW, LabWIndows/CVI e TestStand developers.

DNA-Italy and Focus embedded

Thu, 24 Nov 2011 16:16:33 +0200

IPSES thanks all colleagues who have come to our stands during the exhibition DNA Italy and Focus embedded .
Of course, our technicians are available to discuss with you the projects and solutions that best fit your needs.

IPSES at DNA Italy- Turin 3th-5th November 2011

Wed, 2 Nov 2011 11:51:03 +0200

IPSES will be at the next DNA Italy - saloon to promote, study and manage cultural heritage - Turin 3th -5th November 2011.

You are all invited to join us at DNA Italy - Pavilion B stand 46: IPSES will be there together with TecnART- Physic department of the University of Turin, to show instruments and services for scientific analysis on cultural heritage

On 3th November at 12.00, Dr. Cinzia Maria Mancuso from IPSES and Dr. Fulvio Fantino form TecnArt-University of Turin will hold a conference about :
thermoluminescence principles and photon counting systems for TL dating laboratories

For further information and registration see also
http://www.dnaitalia.it/it/salone/registrazione.html?task=3&cid=72

Microchip Master Certification to IPSES

Wed, 12 Oct 2011 15:36:46 +0200

The Technical Committee of Microchip Technology Inc. renewed to IPSES the MASTER CERTIFICATION, already obtained in 2009, for the year 2010-2011.
A recognition that rewards our work in electronic design and firmware development for all the families of Microchip microcontrollers.

Installed the new TL laboratory made by IPSES at the department of archeology, National Museum and Library in Yangon Myanmar

Fri, 23 Sep 2011 15:46:46 +0200

It is now operating the new laboratory for analysis of thermoluminescence which was projected and implemented by IPSES at the Department of Archaeology of the National Museum and Library of Myanmar in Yangon. The laboratory, which includes all the analytical instruments for TL analysis (thermo-regulating units, heating oven with the group for photon counting, high voltage power supply, vacuum pump, management software), the instrumentation for the counting of alpha activity and all that is needed for the preparation of the samples were installed by our engineers in Yangon in July 2011.

The Facebook page of IPSES exceeded 1750 fans

Mon, 29 Aug 2011 16:38:04 +0200

IPSES is pleased to announce that its Facebook page has exceeded 1750 contacts. We thank all those who signed up.

Reopening offices

Mon, 22 Aug 2011 10:19:53 +0200

IPSES S.r.l announces that from 22/08 all offices are open and operational after the summer break. Also this year, however, technical support was always available to its customers during the entire month of August.

New scientific partnership

Tue, 19 Apr 2011 15:58:12 +0200

IPSES, a leading company in design and manufacturing electronic scientific instruments, since many years specialized in the production of analytical thermoluminescence laboratories for the dating of ceramic materials, is pleased to announce its scientific partnership with TecArt, a Research Group in Cultural Heritage of the Department of Experimental Physics, University of Turin - Italy in collaboration with the Italian National Institute for Nuclear Physics (INFN).
The collaboration with TecnArt, which for many years successfully using the IPSES instrumentation for dating by TL technique, arises from the need to offer scientifically advanced consulting services, both in terms of provided scientific equipment, and for training and analysis.

The New version of D2XX driver for the USB systems produced by IPSES has been released

Fri, 1 Apr 2011 11:34:38 +0200

A few days ago the new version of D2XX driver for the USB systems produced by IPSES has been released
This version (2:08:02) is WHQL certified and is included in the circuit of "Windows Update Driver Distribution" (meaning that the driver is automatically detected and installed on computers connected to the Internet.)

The systems and cards that use the new drivers are:
"MT2USB Control Unit (http://www.ipses.com/prod/MT2/mt2usb.php?language=en).
"MT2HC Control Unit (http://www.ipses.com/prod/MT2/mt2hc-box.php?language=en).
"MT3 Control Unit (http://www.ipses.com/prod/MT3/MT3.php?language=en).
"IO-69 Control Unit (http://www.ipses.com/prod/IO69/io69.php?language=en ).
"IN8 Control Unit (http://www.ipses.com/prod/IO69/in8.php?language=en ).
"9-O Control Unit (http://www.ipses.com/prod/IO69/index.php?language=en ).
"CAN-IO (http://www.ipses.com/prod/IO69/CAN-IO.php?language=en ).
"CAN-Logger (http://www.ipses.com/prod/Logger/CANlogger.php?language=en ).
"CAN-Sniffer (http://www.ipses.com/prod/Logger/CANSniffer.php?language=en ).
"Libra (http://www.ipses.com/prod/LiBRA/index.php?language=en ).

Operating systems supported by the driver are as follows:
"Windows 2000 family.
"Windows XP family (both x86 and x64).
"Windows Server 2003 family both x86 and x64).
"Windows Vista family(both x86 and x64).
"Windows Server 2008 family (both x86 and x64).
"Windows 7 (both x86 and x64).
"Windows Server 2008 Release 2 family, x64.

IPSES once again demonstrated its expertise in recertification WHQL and continues to provide this service to companies that use FTDI chip and want to have a certified and inserted into the "Windows Update Driver Distribution" circuit driver for their product.

IPSES at the NIDAY2011

Mon, 28 Feb 2011 12:24:02 +0200

Also this year the participation of IPSES at the NIDAY was a valuable chance to meet and exchange ideas to present its products and services. IPSES thanks all those who have come on its stand last February 23th and asked everyone to contact its research and development offices to further study with its highly qualified team the best solutions to their needs in the field of industrial automation, testing, systems integration and development with National Instruments tools.

IPSES at NIDAY2011

Thu, 3 Feb 2011 12:02:23 +0200

Also this year, IPSES will participate at the NI-Day 2011, Technology Forum on graphical system design, the annual global conference organized by National Instruments, to be held in Milan Wednesday, February 23, 2011. Presentation of IPSES National Instruments software and hardware development services. Partnership with 6TL and its systems and accessories for testing of which IPSES is the official representative for Italy and Switzerland.

To participate, free registration at: http://sine.ni.com/nievents/app/overview/p/eventId/41178/site/nie/country/it/lang/it/scope/country/location/it
To see the complete program of the event: http://nidays.it/agenda/
For further information on IPSES products and services: http://www.ipses.com/services/testdevice.php?language=en http://www.ipses.com/services/systemintegration.php?language=en

Available the new MT2HC system: Two-axis motor control device at 3A with current control and USB interface

Wed, 26 Jan 2011 16:03:34 +0200

The axis control system MT2HC is a unit capable of controlling two stepper motor either bipolar and unipolar.

The system is also equipped with four inputs and two opto-isolated digital outputs that can be used to manage via software its limit home detectors, and / or to interface to a PLC or other logic devices.

Motor control and configuration of the system is achieved via USB interface, easily managed using the driver provided with.
The rotation speed of the motors can be independently and easily configured to suit your needs.
MT2HC system also has a current PWM control on the motor phases so as to keep the excitation current to 3A.

The system manages at the start and at the end of the movement an acceleration and deceleration ramp, programmable by the user.

The system comes with demo software and driver interface for Windows, compatible with all recent operating systems (including Windows Vista and Windows 7 either 32-bit and 64-bit ones).

WHQL certification for FTDI drivers and Services of upgrading systems with a serial interface on systems with USB interface

Tue, 18 Jan 2011 16:33:36 +0200

IPSES provides a WHQL re-certification service for FTDI drivers addressed to all companies that already use them but who, having changed the PID and / or the VID to identify their products, have now no longer a certificated driver which is no longer usable in the last 64-bit Windows systems.

Once an INF file has been edited, its original digital signature is no longer valid.IPSES, once certified the new driver for the client, may also runs its online distribution through Microsoft's Windows Update Driver Distribution Service, allowing plug and play driver installation.

Besides, Since several years IPSES offers its expertise and experience in the field to renew the systems of its customers (also developed by third parties), migrating the RS232 interface to a more modern and convenient USB interface, with minimal changes to project.

The project is followed in all its parts, including both the supply of Windows WHQL-certified drivers and all the needed software support to make a complete migration of your system with no problems.

Happy holidays from IPSES

Tue, 21 Dec 2010 11:15:19 +0200

IPSES wishes you merry Christmas and a happy 2011 full of joy, health and success!

WEB-IO-WiFi: Input/output Card with 16 inputs and 16 outputs, Ethernet and WiFi interfaces, integrated WEB, telnet and SNMP servers

info@ipses.com — Mon, 6 Dec 2010 10:21:26 +0200

New available model in the IPSES I/O family cards!
WEB-IO-WiFi is a card to manage sixteen optocoupled inputs and sixteen optocoupled outputs with Ethernet and WiFi interfaces, equipped with a WEB, a telnet and a SNMP servers. The WEB server allows to connect and to manage the card using any WEB browser (i. e. Internet Explorer or Firefox), with no needs to install a software on your PC.
Beside, the card can be connected directly to a switch or to a router, by this way it can be accessed by any PC connected to Internet. It is also possible to develop a customized software managed by telnet service or SNMP server. The board is available with built-in antenna or with ultra miniature coaxial (U.FL) connector for external antenna connection.

WEB-IO-WiFi can be directly connected to PLC, to input devices from operator and to other I/O systems. Each input and output status can be read by a web browser or a telnet client at any moment, besides it is shown directly on the board thanks to LEDs fixed on. On request, the card can be equipped with an integrated temperature sensor which allows to monitor in real time the temperature around the regulator voltage module.

WEB-IO is provided with a software for Windows environment, based on telnet service.

New Microsoft Certification for IPSES as Small Business Specialist

info@ipses.com — Fri, 26 Nov 2010 14:42:49 +0200

IPSES is now Microsoft Small Business Specialist: a new certification which, once again, testifies our skills and professional competencies.

System for the characterization of earth samples by cyclical and dynamic tests

info@ipses.com — Wed, 17 Nov 2010 09:49:00 +0200

LabVIEW World number 15/2010 published the article that describes the automatic test system developed by IPSES for the characterization of earth samples handled by CompactRIO fully controllable through PC

Presentation of IPSES I/O cards at the 24th "ELECTRONICA" Exposure in Munich, Germany

info@ipses.com — Tue, 9 Nov 2010 10:56:13 +0200

At the Microchip Technology stand (Hall A4, Booth 560), 24th "ELECTRONICA" Exposure in Munich from November 9th till November 12th 2010, some of IPSES I/O cards will be presented. Among the available versions:
-Web-ADIO-WiFi: card with Ethernet and Wifi interfaces and WEB and telnet servers which allows to manage 8 optocoupled digital inputs, 8 analogical inputs, 8 optocoupled digital outputs and 8 analogical outputs.

IO69-USB: selfpowered card with USB interface which allows to manage six optocoupled inputs and nine relay outputs.

CAN-IO: card with CAN interface which allows to manage sixteen optocoupled inputs and sixteen optocoupled outputs

WEB-ADIO-WiFi: Input/output Card with 8 analogical and 8 digital inputs and 8 analogical and 8 digital outputs, Ethernet and WiFi interface, WEB and telnet servers and SNMP client

info@ipses.com — Fri, 29 Oct 2010 09:45:39 +0200

WEB-ADIO-WiFi is a card to manage 8 optocoupled digital inputs, 8 analogical inputs, 8 optocoupled digital outputs and 8 analogical outputs with Ethernet and WiFi interface, equipped with a WEB and a telnet servers and a SNMP client. The WEB server allows to connect and to manage the card using any web browser (i. e. Internet Explorer), with no needs to install a software on your PC.
Beside, the card can be connected directly to a switch or to a router. It is also possible to develop a customized software managed by telnet service or SNMP client.
WEB-ADIO-WiFi can be directly connected to PLC, to input devices from operator and to other I/O systems. Each input and output status can be read by a web browser or a telnet client at any moment, besides the status of digital inputs and outputs is shown directly on the board thanks to LEDs fixed on.

The use of Ethernet and WiFi interface and the implemented WEB and telnet servers allow WEB-ADIO-WiFi high speed, totally hardware independence, flexibility in the expansion of connected cards.
The board size is the standard European Format Card so that it can be easily integrated in several systems. Besides, WEB-ADIO-WiFi has its digital inputs and outputs galvanically isolated to protect from electromagnetic disturbances and ground loops, improving its reliability and quality.
The analogical inputs and outputs have an operational range from 0 up to 10V, with a resolution of 10mV (10 bit ADC) and are calibrated one by one.

WEB-ADIO-WiFi is provided with a software for Windows environment, based on telnet service

WEB ADIO: Input/output Card with 8 analogical and 8 digital inputs and 8 analogical and 8 digital outputs, Ethernet interface, WEB and telnet servers and SNMP client

info@ipses.com — Tue, 19 Oct 2010 10:09:30 +0200

WEB-ADIO is a card to manage 8 optocoupled digital inputs, 8 analogical inputs, 8 optocoupled digital outputs and 8 analogical outputs with Ethernet interface, equipped with a web and a telnet servers and a SNMP client. The WEB server allows to connect and to manage the card using any WEB browser (i. e. Internet Explorer), with no needs to install a software on your PC.
Beside, the card can be connected directly to a switch or to a router. It is also possible to develop a customized software managed by telnet service or SNMP client.
WEB-ADIO can be directly connected to PLC, to input devices from operator and to other I/O systems. Each input and output status can be read by a web browser or a telnet client at any moment, besides the status of digital inputs and outputs is shown directly on the board thanks to LEDs fixed on.

On request, the card can be equipped with an integrated temperature sensor which allows monitoring in real time the temperature around the regulator voltage module.

The board size is the standard European Format Card so that it can be easily integrated in several systems. Besides, WEB-ADIO has its digital inputs and outputs galvanically isolated to protect from electromagnetic disturbances and ground loops, improving its reliability and quality.
The analogical inputs and outputs have an operational range from 0 up to 10V, with a resolution of 10mV (10 bit ADC).

WEB-ADIO is provided with a software for Windows environment, based on telnet service.

CAN Logger: Data Logger for bus CAN with USB and RS232 interface, equipped with SD card.

info@ipses.com — Thu, 7 Oct 2010 15:27:33 +0200

CAN Logger is a control unit which allows to filter and to memorize all CAN frames of the bus on which is connected on. Beside, the system can be directly interfaced to PC through USB or RS232 interfaces.
The unit is easy to use and to configure, thanks to the provided software for Windows XP, Vista and 7.

CAN Logger can be used immediately with any CAN BUS, because it is completely configurable.
Customizable parameters are:
- High-speed / Low-speed.
- Baudrate.
- Address.

CAN Logger is available in two versions, CAN Logger-Flash and CAN Logger-SD:
CAN Logger-Flash can record up to 9,000 can messages on a on-board flash memory readable with the provided software.
CAN Logger-SD allows to record messages form CAN bus directly on a Micro-SD card: that SD card can be read from any card reader, beside there is the possibility to connect the logger directly to a PC using the provided software.

LiBRA - Balancing and managing lithium battery system

info@ipses.com — Fri, 1 Oct 2010 14:27:11 +0200

LiBRA is an innovative lithium battery management system allowing optimal charge and discharge, temperature control and balancing of every single cell. LiBRA protects battery preventing going under and over cell voltage current and temperature limit. Beside, the system allows battery enhancement and complete monitoring in real time.
LiBRA transforms battery cells in a true smart battery, allowing fully configurability and programmability in protecting, monitoring and enhancing battery. Beside, the module is equipped with a diagnostic output system which can be access through USB or RS232 interface by any PC . It provides information about battery status, its voltage and health, displaying all relevant data in your PC video with the software provided with.

MASTER CERTIFICATION to IPSES

info@ipses.com (www.ipses.com) — Fri, 17 Sep 2010 10:28:11 +0200

The Technical Committee of Microchip Technology Inc. also given to IPSES the MASTER CERTIFICATION for the year 2009-2010.
A recognition that rewards our work in electronic design and firmware development for all the families of Microchip microcontrollers.

New version of WEB-IO card

info@ipses.com (www.ipses.com) — Thu, 15 Jul 2010 15:45:26 +0200

New version of WEB-IO card now available in two models: with power supply voltage from 5V up to 9V and with power supply voltage from 7V up to 15V

HiVo - High voltage power supply up to 2.000V, 2mA

info@ipses.com (www.ipses.com) — Mon, 14 Jun 2010 14:32:56 +0200

HiVo is a device especially conceived to furnish an adjustable elevated voltage up to 2.000V. Although it is mainly used to supply photomultipliers, HiVo can be employed with any device needing high voltage and low current supply.

HiVo can be customized to serve our clients' needs to the best: for this, on request, HiVo is available with any supply voltage and positive and/or negative output voltage.

HiVo is equipped with a 3,5 digit LCD display showing the output voltage. A 10-turn potentiometer sets the voltage and assures precision and stability.

Services and products for Testing

info@ipses.com (www.ipses.com) — Tue, 27 Apr 2010 09:29:56 +0200

On line the new brochure describing services and products for testing by IPSES:
complete test systems
architecture design
developing test sequences and customized software
hardware integration
Installation in production line

6TL official representative in Italy and Switzerland

info@ipses.com (www.ipses.com) — Fri, 9 Apr 2010 16:17:24 +0200

We are pleased to announce IPSES is become official representative for 6TL test systems (www.6tl.es) in Italy and Switzerland. Besides, IPSES will offer its clients technical support, system integration and development of test applications. Further information and documentation are available on our website www.6tl.ipses.com

WEB-IO

info@ipses.com (www.ipses.com) — Sat, 6 Feb 2010 20:28:35 +0200

WEB-IO is a card to manage sixteen optocoupled inputs and sixteen optocoupled outputs with Ethernet interface, equipped with a web and a telnet servers. The web server allows to connect and to manage the card using any web browser (i. e. Internet Explorer), with no needs to install a software on your PC.

IO-69-USB

info@ipses.com (www.ipses.com) — Sat, 6 Feb 2010 09:09:49 +0200

IO69-USB is a card with USB interface which allows to manage six optocoupled inputs and nine relay outputs. Easy to use, thanks to its installation driver and software libraries which also reduce installation costs, IO69-USB is the right answer to the need to acquire digital signals and to control power outputs from a PC in an industrial environment.