MT2ETH(MS) is a small-size low-power control device, which can control two stepper motors (unipolar or bipolar) and their respective limit/home detection sensors (two for each axis, with programmable polarity).
The motor rotation speed can be easily configured independently to answer user needs. Half step speed is programmable from 1 ms up to 1.000 ms.
Moreover, the device has an auxiliary output with a dedicated control for its activation
The card can be directly conncted to stepper motors with numinal current up to 0,6 A. For upper current, a power stade has to added.
The motor control and the device configuration are achieved through ethernet interface, managed by the TCP/IP communication protocol.
To avoid connections without authorisation, the access is protected by a password, which can be set by the user.
These cards with ethernet interface can be direclty connected to a PC or to internet or ethernet. Thanks to this, their management can be done from any PC connected to the net.
The MT2ETHMS version is equipped with a PWM current control on the motor phases and can reach a movement precision of 1/8 of step.
Input voltage : 7 - 15 Vdc (unregulated).
Current consumption : 250 mA @ 12 Vdc (plus motor and auxiliary exit consumption).
Dimension : 75 x 75 mm (2,95 x 2,95 inch).
|
