Mon-Fri 09am -01pm | 02pm -06pm

In line test system

A perfect basis for an automatic integrated Test System for medium to high manufacturing volumes. Important technical and economic advantages due to their modular structure and expansion capability are evident.

The base system can be used as a stand-alone system or be integrated into single or multiple units providing a high throughput in-line production test system.

The System Control and Automation are based on CAN bus. One single four-wire cable provides power to and controls all the devices. The system is simple, easy to maintain and cost-effective.

It includes an industrial PC Controller and UPS that controls all steps for automatic error-free power-up and down of the test system.

After Switching ON the power, the System automatically initializes the test system and starts the test software. Then it identifies the attached test fixture and automatically selects the adequate executive software that matches the connected test fixture. The Controller has 6 free slots to install additional PCI cards.

Different test fixtures can be used to test PCB’s or assembled products. For testing PCB’s, there is a choice of standard fixture platforms including their own linear pushing system, or alternatively a low-cost fixture solution using our automatic precision servo pusher module with three pre-set test position levels for HiPot test, Functional Test and ICT test using different lengths of test probes.

Test Instruments may be selected in PCI format (6 free PCI slots are available in the PC Controller), PXI format after installing an optional 5 to 18 slots PXI chassis, or any other LXI, VXI or other Rack & Stack type of instrumentation.

Gallery

Additional Documents